Filter
Top Products
Operating Information
AM700 Audio Measurement Set Service Manual
2–7
After calibration, the screen will display the Paint screen. You can test areas of
the screen for activity by touching the screen at various points. The touch point
will become highlighted. The Clear soft key on the touch screen erases the
highlighted areas of the Paint screen. Press any application front-panel button to
exit the paint screen and start the application.
Figure 2–5: Touch screen calibration
The AM700 has a system clock with an internal backup battery. After setting for
your local time, it is ready to use. Performing this exercise for the first time will
also introduce you to the Configure menus that you will use as you set up the
AM700. To set the clock use the following procedure:
1. Press the Configure button on the front panel. This displays the choices for
configuring the various user selections of the AM700. Clock setting is done
in the System Setup option.
Setting the AM700 Clock