Filter
Top Products
Performance Verification
AM700 Audio Measurement Set Service Manual
4–7
3. Select the generator as the acquisition input source for CH A and CH B
(normal default is FP A and FP B) by touching the double arrow symbol
next to the generator choice.
This control toggles the generator selection between the two available
choices: connection to the front panel XLR connectors or direct connection
from the A and B analog generators. Press the Clear Menu button.
4. Press the Control button in the Generator section of the control panel (see
Figure 4–3) to display the generator selection screen as shown in Figure 4–4.
Figure 4–3: Audio generator controls