Filter
Top Products
Preface
xxiv
AM700 Audio Measurement Set Service Manual
Verification Procedure
Test procedures to verify the functional performance of the AM700 are found in
this section. A list of test equipment needed to perform the procedures precedes
the test procedures. These verification procedures require test equipment and
automated testing software that is not readily available to most service depart-
ments.
Adjustment Procedure
The adjustment procedures are shorter that the verification procedures. While
there are many parameters of the AM700 that require specification and verifica-
tion, there are relatively few adjustments. A list of test equipment need to
perform the adjustments of the AM700 is provide, and, as with the verification
procedure, some of the equipment may not be readily available to the service
person. Some the adjustments can be made only with the circuit board on
extender cables to be able to access the adjustable controls.
Maintenance
Maintenance of the AM700 is described in this section. General maintenance
procedures for external and internal cleaning and static protection precautions are
followed by some specific maintenance procedures for the AM700. Also in this
section is a description of the internal self-diagnostics that the AM700 runs,
information on the board exchange program, the removal and replacement steps
to remove the assemblies from the AM700, and the rack adapter instructions.
Options
The available options for the AM700 are very briefly discussed. Option
information is incorporated in the appropriate location throughout the manual,
but this space is provided to summarize the options and add information for
future options as they are developed.
Replaceable Electrical Parts
The parts list of modules and replaceable electrical parts is supplied in this
section. Attempts to repair a circuit board by a non-Tektronix approved service
person during the warranty period of the instrument will void the warranty, and
credit for a damaged board will not be given for an exchange if the module is
included in the board exchange program.