Filter
Top Products
Operating Information
AM700 Audio Measurement Set Service Manual
2–15
When finished making your selections, press Clear Menu to exit the Input
Selections menu.
Pull-down Input
Selection Menu.
Use the large
knob to move the
selection box to
the signal you
want.
Touch the measurement
channel soft key to display
the pull-down menu.
Touch the measurement
channel soft key a second
time to assign the input to
the channel and clear the
pull-down menu.
Use the quick select soft
keys to set both channels to
the same generator type.
Figure 2–12: Measurement channel assignment pull-down menu
The View Setup menu permits AM700 users to specify how measurement results
should be displayed on the screen. Contents of this menu vary depending upon
the current application. In the follow description, the FFT application is active.
View Selection Bar. The top line in the View Setup screen is a view selection bar
as shown in Figure 2–13. The selections that are made in the remaining portion
of the View Setup window apply only to the selected view. The view choices in
the view selection bar include an icon that indicates the type of view that is
selected. For example, the possible choices for FFT Analyzer in FFT mode are
Interpolator, Bar Graph, and Spectrogram. View Setup choices are illustrated in
each of the applications in Section 4 of this manual.
For each type of view, the AM700 also offers options that allow you to configure
the display for your viewing requirements. You may configure the display in the
View Setup menu (see Figure 2–13).
View Setup