Intel PXA255 Speaker System User Manual


 
Intel® PXA255 Processor Developer’s Manual 2-15
System Architecture
SDATA_OUT/
GPIO[30]
ICOCZ
AC97 Audio Port data out. (output) Output from the
PXA255 processor to Codecs 0 and 1.
I
2
S data out. (output) Output line for the I
2
S Controller.
Pulled High -
Note[1]
Note [3]
SYNC/
GPIO[31]
ICOCZ
AC97 Audio Port sync signal. (output) Frame sync
signal for the AC97 Controller.
I
2
S sync. (output) Frame sync signal for the I
2
S
Controller.
Pulled High -
Note[1]
Note [3]
nACRESET OC AC97 Audio Port reset signal. (output) Driven Low Driven Low
I
2
C Controller Pins
SCL ICOCZ I
2
C clock. (bidirectional) Hi-Z Hi-Z
SDA ICOCZ I
2
C data. (bidirectional). Hi-Z Hi-Z
PWM Pins
PWM[1:0]/
GPIO[17:16]
ICOCZ Pulse Width Modulation channels 0 and 1. (outputs)
Pulled High -
Note[1]
Note [3]
DMA Pins
DREQ[1:0]/
GPIO[19:20]
ICOCZ
DMA Request. (input) Notifies the DMA Controller that
an external device requires a DMA transaction. DREQ[1]
is GPIO[19]. DREQ[0] is GPIO[20].
Pulled High -
Note[1]
Note [3]
GPIO Pins
GPIO[1:0] ICOCZ
General Purpose I/O. Wakeup sources on both rising
and falling edges on nRESET.
Pulled High
Note [1]
Note [3]
GPIO[14:2] ICOCZ
General Purpose I/O. More wakeup sources for sleep
mode.
Pulled High
Note [1]
Note [3]
GPIO[22:21] ICOCZ
General Purpose I/O. Additional General Purpose I/O
pins.
Pulled High
Note [1]
Note [3]
Crystal and Clock Pins
PXTAL IA 3.6864 Mhz crystal input. No external caps are required. Note [2] Note [2]
PEXTAL OA
3.6864 Mhz crystal output. No external caps are
required.
Note [2] Note [2]
TXTAL IA 32 Khz crystal input. No external caps are required. Note [2] Note [2]
TEXTAL OA 32 Khz crystal output. No external caps are required. Note [2] Note [2]
L_DD[12]/
GPIO[70]
ICOCZ
LCD display data. (output) Transfers pixel information
from the LCD Controller to the external LCD panel.
RTC clock. (output) Real time clock 1 Hz tick.
Pulled High
Note [1]
Note [3]
L_DD[13]/
GPIO[71]
ICOCZ
LCD display data. (output) Transfers the pixel
information from the LCD Controller to the external LCD
panel.
3.6864 MHz clock. (output) Output from 3.6864 MHz
oscillator.
Pulled High -
Note[1]
Note [3]
L_DD[14]/
GPIO[72]
ICOCZ
LCD display data. (output) Transfers pixel information
from the LCD Controller to the external LCD panel.
32 kHz clock. (output) Output from the 32 kHz oscillator.
Pulled High -
Note[1]
Note [3]
Table 2-6. Pin & Signal Descriptions for the PXA255 Processor (Sheet 7 of 9)
Pin Name Type Signal Descriptions Reset State Sleep State