Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
2-62 Polycom, Inc.
• Overlay Layouts are not selected as defaults by the system. Default layouts are selected
as in previous versions and are described in detail in "Auto Layout – Default Layouts” on
page 2-33.
•The Overlay Layouts are not available for selection when using PCM or Click&View for
Personal Layout selection. PCM menus are not affected by the use of Overlay Layouts and
are displayed as the top level overlay.
• Message Overlay is not affected by the use of Overlay Layouts and is displayed as the top
level overlay.
• Vertical Position for Site Name display: Site Names are displayed for all cells. Because the
smaller cells are located at the bottom of the large cell, when enabling Site Names it is
advisable not to locate the Site Name at the bottom of the cells.
Telepresence (ITP) Room Layout Overlay
•The Telepresence (ITP) Room Layout Overlay is displayed with a border of the selected
Skin’s border color for the entire room while no border is displayed between the
individual room cameras. For more information see “Skins” on page 2-38.
• When an ITP Room is selected for as an overlay cell, only Telepresence Room names are
listed for selection in the drop-down menu - not the individual endpoints in the ITP
Room.
If Auto is selected in the drop-down menu, the overlay cell will display the active
speaker unless the active speaker is the large cell. If the endpoint itself is the current
speaker, the previous speaker is displayed.
For more information see "Selecting the Overlay Layouts” on page 2-63. All other System
behavior for Video Forcing and Personal Layout Control using the Overlay Layouts during
an ongoing conference is the same as for previous versions and is described in the
RealPresence Collaboration Server 1500/2000/4000 Getting Started Guide:
— "Video Forcing (AVC-based Conferences)”
on page 3-
58
— "Personal Layout Control with the RMX Web Client” on page 3-68.
Standalone Endpoint Layout Overlay
•Each Standalone Endpoint Layout Overlay is displayed with a border of the selected Skin’s
border color. For more information see “Skins” on page 2-38.