Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Chapter 10-Operator Assistance & Participant Move
Polycom, Inc. 10-11
8 Click the Video Settings tab.
The New Profile - Video Settings dialog box opens.
9 Define the video display mode and layout. For more details, see Table 2-12, “New AVC
Profile - Video Settings Parameters,” on page 2-30.
10 Click the Skins tab to modify the background and frames.
The New Profile - Skins dialog box opens.
11 Select one of the Skin options.
12 Click IVR tab.
The New Profile - IVR dialog box opens.
13 Select the IVR Service and if the conference requires a chairperson.
14 Optional. Click the Recording tab to enable conference recording with Polycom RSS
2000.
15 Define the various recording parameters. for details, see Table 2-17, “New AVC Profile -
Recording Parameters,” on page 2-40.
16 Click OK to complete the Profile definition.
A new Profile is created and added to the Conference Profiles list.
Defining an Ongoing Operator Conference
To start a conference from the Conference pane:
1 In the Conferences pane, click the New Conference ( ) button.
The New Conference – General dialog box opens.
Content Video Definition
Content Settings Select the transmission mode for the Content channel:
Graphics — basic mode, intended for normal graphics
Hi-res Graphics — a higher bit rate intended for high resolution
graphic display
Live Video — Content channel displays live video
Selection of a higher bit rate for the Content results in a lower bit rate
for the people channel.
For more information, see "H.239 / People+Content” on page 4-2.
Content Protocol H.263Content is shared using H.263 even if some endpoints have
H.264 capability.
Up to H.264 – H.264 is the default Content sharing algorithm.
When selected:
Content is shared using H.264 if all endpoints have H.264
capability.
Content is shared using H.263 if all endpoints do not have H.264
capability.
Endpoints that do not have at least H.263 capability can connect
to the conference but cannot share Content.
Table 10-3 New Profile - Video Quality Parameters (Continued)
Field/Option Description