Filter
Top Products
Chapter 23-RMX Hardware Monitoring
Polycom, Inc. 23-25
5 Run Diagnostic Tests & Tests Monitoring by clicking the Run Tests button. In the
Hardware Monitor pane, the toolbar and card statuses change to Tests in progress.
When the RMX enters “Diagnostics Mode”, the status MPM+/MPMx, CNTL/CNTL
1500/CNTL 4000 and RTM IP/RTM IP 1500/RTM IP 4000 changes to “Diagnostics”
Table 23-18 Run Tests - Parameters
Parameter Description
Diagnostic Status Basic Diagnostic Status:
• Ready - ready to run diagnostics
• Test in Progress - running diagnostics
• Passed/Failed - Passed/Failed the diagnostics tests
Estimated Duration Estimated time needed to run Basic Diagnostic tests.
Time Left Estimated time to complete Basic Diagnostic tests.