Filter
Top Products
Appendix C-CDR Fields - Unformatted File
Polycom, Inc. C-21
Dialing Direction The dialing direction, as follows:
0 - Dial-out
5 - Dial-in
Bonding Mode Not supported.
Always contains the value 0.
Number Of
Channels
Note: This field is only relevant to ISDN/PSTN participants.
The number of channels being connected for this participant.
Net Channel Width Not supported.
Always contains the value 0.
Network Service
Name
The name of the Network Service.
An empty field “” indicates the default Network Service.
Restrict Not supported.
Always contains the value 0.
Audio Only Indicates the participant’s Audio Only setting, as follows:
0 - The participant is not an Audio Only participant
1 - The participant is an Audio Only participant
255 - Unknown
Default Number
Type
Note: This field is only relevant to ISDN/PSTN participants.
The type of telephone number, as follows:
0 - Unknown
1 - International
2 - National
3 - Network specific
4 - Subscriber
6 - Abbreviated
255 - Taken from Network Service, default
Note: For dial-in participants, the only possible value is:
255 - Taken from Network Service
Net Sub-Service
Name
Not supported.
This field remains empty.
Number of
Participant Phone
Numbers
Note: This field is only relevant to ISDN/PSTN participants.
The number of participant phone numbers.
In a dial-in connection, the participant phone number is the CLI (Calling Line
Identification) as identified by the MCU.
In a dial-out connection, participant phone numbers are the phone numbers
dialed by the MCU for each participant channel.
Table C-14 Event Fields for Events 10, 101, 105 - DEFINED PARTICIPANT, USER ADD
PARTICIPANT, USER UPDATE PARTICIPANT (Continued)
Field Description