Filter
Top Products
Chapter 16-Network Services
Polycom, Inc. 16-65
13 Click the SIP Servers tab.
14 Define the Primary and Alternate SIP Server for this network Service.
The field definitions of the SIP Servers tab are the same as for the Default IP Network
Service. For more information see the RealPresence Collaboration Server (RMX) 1500/2000/
4000 Administrator’s Guide, "Click the SIP Servers tab.” on page 16-19.
15 Click the Security tab.
The field definitions of the Security tab are the same as for the Default IP Network Service.
For more information see the RealPresence Collaboration Server (RMX) 1500/2000/4000
Administrator’s Guide, "Click the Security tab.” on page 16-21.
16 Optional. To configure the ICE environment, click the SIP Advanced tab.
17 Modify the following fields:
18 Click the OK button.
The new Network Service is added to the IP Network Services list pane.
Setting a Network Service as Default
The default Network Service is used when no Network Service is selected for the following:
• Dial out participants
• Reserving resources for participants when starting an ongoing conference
• Gateway calls
In addition, the Signaling Host IP address and the MCU Prefix in GK displayed on the
RealPresence Collaboration Server Web Client main screen are taken from the default H.323
Network Service.
One IP Network Service can be defined as default for H.323 connections and another
Network Service as default for SIP connections. If the IP Network Service supports both
H.323 and SIP connections, you can set the same Network Service as default for both H.323
and SIP, or for H.323-only or for SIP-only.
• Starting with Version 7.1, Registration of conferencing entities with the SIP Servers was moved
to the conferencing entities and is defined in the Conference Profile.
• If Microsoft Office Communications or Lync server are part of this network service, a certificate
must be created for this network service. If each network connected to the RMX includes
Microsoft Office Communications or Lync server, separate certificates must be created and sent
to the RMX for each of these networks.
• If the Network Service does not include a DNS, you must use the IP address of the SIP Server
instead of its name.
Table 16-38 Default IP Network Service – SIP Advanced
Field Description
Server User Name Enter the User name for this service as defined in the Active
Directory. For example, enter rmxNet2.
This field is disabled if the ICE Environment field is set to None.
ICE Environment Select MS (for Microsoft ICE implementation) to enable the ICE
integration.
This field is disabled if the RMX is not running in MPM+ Card
Configuration Mode.