Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
4-20 Polycom, Inc.
Note: Select this option when Avaya IP Softphone will be connecting to the conference.
Changing the Default Layout for Displaying Content on Legacy Endpoints
The default layout that will be used to display Content on the screens of legacy endpoints is
defined by the system flag LEGACY_EP_CONTENT_DEFAULT_LAYOUT.
The configured default layout is 1+4 (
CP_LAYOUT_1P4VER). You can change the default
layout configuration by entering a new value for the flag in the system configuration.
To modify system flags:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2 In the MCMS_PARAMETERS
tab, double-click the
LEGACY_EP_CONTENT_DEFAULT_LAYOUT entry.
The Edit Flag dialog box is displayed.
3 In the Value field, enter the flag value for the required layout as follows:
Table 4-9 LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values
Layout Flag Value
CP_LAYOUT_1X1
CP_LAYOUT_1X2
CP_LAYOUT_1X2HOR
CP_LAYOUT_1X2VER
CP_LAYOUT_2X1
CP_LAYOUT_1P2HOR
CP_LAYOUT_1P2HOR_UP
CP_LAYOUT_1P2VER
CP_LAYOUT_2X2
CP_LAYOUT_1P3HOR_UP
CP_LAYOUT_1P3VER
CP_LAYOUT_1P4HOR_UP