Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-26 Polycom, Inc.
EXTERNAL_DB_PASSWOR
D
The password associated with the user name defined for the
RMX on the external database server.
Default: POLYCOM
EXTERNAL_DB_PORT The external database server port used by the RMX to send
and receive XML requests/responses.
For secure communications set the value to 443.
Default: 5005.
FADE_IN_FADE_OUT Enables or disables the transition format between speakers in
a Continuous Presence conference.
When set to YES (default), the system fades in the current
speaker while fading out the previous speaker.
When set to NO, the transition is sharp and immediate.
Note: Fade In / Fade Out is not supported with MPMx cards.
FORCE_1X1_LAYOUT_ON_
CASCADED_LINK_CONNE
CTION
When set to YES, the cascaded link is automatically set to
Full Screen (1x1) in CP conferences forcing the speaker in
one cascaded conference to display in full window in the
video layout of the other conference.
Set this flag to NO when connecting to an MGC using a
cascaded link, if the MGC is functioning as a Gateway and
participant layouts on the other network are not to be forced to
1X1.
Default: YES
FORCE_AUDIO_CODEC_F
OR_MS_SINGLE_CORE
This flag is used to force the use of a specific Audio algorithm
when a Microsoft Office Communicator R2 or Lync Client is
hosted on a workstation with a single core processor. The flag
value overrides the default audio algorithm selection (G.722.1)
that may cause audio quality problems when G.722.1 is used
by Microsoft Clients running on single processor workstations.
This flag can be set to:
AUTO – No forcing occurs and the RMX negotiates a full
set of Audio algorithm during capabilities exchange.
G711A/U or G722 – Set this flag value according to the
hosting workstation capabilities. If the RMX detects single
core host during capabilities exchange it will assign a
G.711 or G.722 Audio algorithm according to the flag
value.
Possible values: AUTO, G711A, G711U, G722
Default: G711A
FORCE_ENCRYPTION_FO
R_UNDEFINED_PARTICIPA
NT_IN_WHEN_AVAILABLE_
MODE
When set to YES (default), Undefined participants must
connect encrypted, otherwise they are disconnected.
When set to NO and the conference Encryption in the Profile
is set to “Encrypt When Possible”, both Encrypted and Non-
encrypted Undefined participants can connect to the same
conferences, where encryption is the preferred setting.
Default: YES
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description