Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Chapter 22-System Configuration Flags
Polycom, Inc. 22-51
ULTRA_SECURE_MODE System Flag Descriptions
Cyclic File Systems
ENABLE_CYCLIC_FIL
E_SYSTEM_ALARMS
YES/NO YES YES/NO NO
Table 22-8 ULTRA_SECURE_MODE Flag Value – Effect on System Flags (Continued)
Flag
ULTRA_SECURE_MODE =
YES NO
Range Default Range Default
Table 22-9 ULTRA_SECURE_MODE System Flag Descriptions
Flag Description
Network Security
SEPARATE_MNGT_NET
WORK
When this System Flag is set to YES, all signaling between IP
endpoints and the RMX is via the LAN 2 port, while all RMX
management sessions are hosted via the LAN 3 port.
Login and Session Management
APACHE_KEEP_ALIVE_
TIMEOUT
The time allowed for the connection between a client and the Apache
Server to be idle before the connection is terminated.
LAST_LOGIN
_ATTEMPTS
The system can display a record of the last Login of the user. It is
displayed in the Main Screen of the RMX Web Client or RMX Manager.
To enable it, set this System Flag to YES.
MAX_KEEP_ALIVE
_REQUESTS
The number of 15-second APACHE_KEEP_ALIVE_TIMEOUT request
intervals for the Apache server.
A value of 2880 keeps the server alive for 12 hours while a value of
5760 keeps the server alive for 24 hours.
Default: 0 (This value should never be used)
MAX_NUMBER_OF_MA
NAGEMENT_SESSIONS
_PER_SYSTEM
The maximum number of management sessions per system is
determined by the value of this System Flag.
Any attempt to exceed the maximum number of management sessions
per system is recorded as an Audit Event.
MAX_NUMBER_OF_MA
NAGEMENT_SESSIONS
_PER_USER
The maximum number of management sessions per user is
determined by the value of this System Flag. Any attempt to exceed
the maximum number of management sessions per user is recorded
as an Audit Event.
SESSION_TIMEOUT_IN
_MINUTES
If there is no input from the user or if the connection is idle for longer
than the number of minutes specified by the setting of this System
Flag, the connection to the RMX is terminated. A flag value of 0 means
Session Timeout is disabled, This feature cannot be disabled when the
RMX is in Ultra Secure mode.