Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Chapter 21-RealPresence Collaboration Server (RMX) Administration and Utilities
Polycom, Inc. 21-11
Configuring the Video/Voice Resources in MPM Mode
To allocate Voice resources:
1 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
A single slider is displayed, calibrated according to licensed video resources indicated
in CIF ports in the MCU.
2 Move the slider to the number of Voice ports to be allocated.
The slider moves in multiples of two (in MPM and MPM+ Card configuration Modes) or
three (in MPMx Card Configuration Mode), converting CIF video ports to voice ports in
groups of two/three, with each CIF video port converting to five voice ports in MPM
and MPM+ Card configuration Modes and four voice ports in MPMx Card Configuration
Mode. The minimum number of voice ports that can be allocated is 10 (2 video ports x 5
voice ports per video port) in MPM and MPM+ Card configuration Modes and 12 (3 video
ports x 4 voice ports per video port) in MPMx Card configuration Mode.
3 Click OK.
Configuring the Video/Voice Resources in MPM+ and MPMx Mode
There are two Resource Capacity modes in MPM+ and MPMx Mode:
Flexible Resource Capacity
Fixed Resource Capacity
Resource re-configuration should only be performed when no conferences are running on the
MCU.
Updating the configuration sequentially requires a 10 seconds wait between updates, to let the
system complete the update process.
From Version 7.1 MPM media cards are not supported.
Resource Maximum from License
Resource re-configuration should only be performed when no conferences are running on the
MCU.
Updating the configuration sequentially requires a 10 seconds wait between updates, to let the
system complete the update process.