Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom, Inc. 23-1
23
RMX Hardware Monitoring
The status and properties of the RMX hardware components can be viewed and monitored
in the Hardware Monitor list pane.
Viewing the Status of the Hardware Components
The Hardware Monitor’s status column displays the present status of the hardware
components. In addition to the status, temperature and voltage indications are provided for
each component.
The MCU’s Shelf Management Server is what users are connecting to when accessing the
Hardware Monitor pane. This pane can be accessed in either two ways: through the RMX Web
Client or the Shelf Management Server. Connection via the Shelf Management Server
enables users to access the Hardware Monitor even when the connection through the RMX
Web Client is unavailable. The ability to connect directly via the Shelf Management Server
enables users to: enter the Hardware Monitor and view the problematic hardware
components, reset and restart the MCU and run diagnostics. Running diagnostics and
restarting the MCU can only be done via direct connection to the Shelf Management Server.
For more information, see "Diagnostic Mode (RMX 1500/2000/4000)” on page 23-21
To view the status of the Hardware Components on the RMX 1500/2000/4000:
>> In the RMX Management pane, click the Hardware Monitor button.
The Hardware Monitor pane is displayed.
When accessing the Shelf Management server, the content displayed will be available in English
only.
In the Hardware Monitor, Slots 1 & 2 may sometimes appear as duplicates in the Slot list.