Filter
Top Products
Chapter 22-System Configuration Flags
Polycom, Inc. 22-5
FORCE_CIF_PORT_ALLOC
ATION
Sets the MCU to allocate one CIF video resource to an
endpoint, regardless of the resolution determined by the
Conference Profile parameters. You can specify the endpoint
types for which resource allocation can be forced to CIF
resource, enabling other types of endpoints to use higher
resolutions in the same conference.
Enter the product type to which the CIF resource should be
allocated. Possible values are:
• CMA Desktop - for CMA desktop client
• VSX nnnn - where nnnn represents the model number for
example, VSX 8000.
FORCE_STRONG_PASSWO
RD_POLICY
When set to YES (default when
ULTRA_SECURE_MODE=YES), implements the Strong
Password rules. For more details, see “Implementing Strong
Passwords” on page 15-10.
Default: NO
FORCE_SYSTEM_BROADC
AST_VOLUME
If set to YES, the level of broadcasting volume of the
connected participant is value taken from the system flag
SYSTEM_BROADCAST_VOLUME.
If set to NO (default), the broadcasting volume level is 5.
FORCE_SYSTEM_LISTENIN
G_VOLUME
If set to YES, the level of listening volume of the connected
participant is value taken from the system flag
SYSTEM_LISTENING_VOLUME.
If set to NO (default), the listening volume level is 5.
GK_MANDATORY_FOR_CA
LLS_IN
If set to YES, a gatekeeper is required to receive incoming
H.323 calls. If a gatekeeper is not configure in the RMX, the
calls will fail.
If set to NO (default), gatekeeper is not required to process
H.323 incoming calls and H.323 participants can dial in with
or without a gatekeeper.
GK_MANDATORY_FOR_CA
LLS_OUT
If set to YES, a gatekeeper is required to perform H.323
outgoing calls. If a gatekeeper is not configure on the RMX,
the calls will fail.
If set to NO (default), gatekeeper is not required to dial out to
H.323 participants and calls can be dialed out with or without
a gatekeeper.
H263_ANNEX_T Set to NO to send the content stream without Annex T and
enable Aethra and Tandberg endpoints, that do not support
Annex T, to process the content.
Default: YES
HD_THRESHOLD_BITRATE Sets the minimum bit rate required by endpoints to connect to
an HD Conference. Endpoints that cannot support this bit rate
are connected as audio only.
Range: 384kbps - 4Mbs (Default: 768)
Table 22-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description