Filter
Top Products
Appendix H-Setting the MCU for Integration Into Microsoft Environment
Polycom, Inc. H-9
5 Click the Add button to add the MCU as trusted host.
The Add Authorized Host dialog box opens.
6 In the Add Authorized Host dialog box, enter the MCU FQDN name as defined in the
DNS and will be used in the Static Routes definition.
7 In the Settings section, select the Throttle as Server and Treat As Authenticated check
boxes.
8 Click OK.
The defined MCU appears in the trusted servers list in the server Front End Properties—
Host Authorization dialog box.
Setting the Static Route for MCU in the OCS
To add MCU to the Routing Roles:
9 In the Front End Properties dialog box, click the Routing tab.
10 Click the
Add button.
The Add Static Routes dialog box opens.
If routing between the MCU and the OCS using Static Routes is required, do not close this dialog
box, and continue with the following procedure. If you do not want to define Static Routes, click OK
to close this dialog box.