Filter
Top Products
Chapter 22-System Configuration Flags
Polycom, Inc. 22-9
IVR_MESSAGE_VOLUME The volume of IVR messages varies according to the value of
this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the IVR messages
1 – lowest volume
10 – highest volume
Notes:
• It is not recommended to disable IVR messages by setting
the flag value to 0.
• System reset is not required for flag changes to take
effect.
IVR_MUSIC_VOLUME The volume of the IVR music played when a single participant
is connected to the conference varies according to the value
of this flag.
Possible value range: 0-10 (Default: 5).
0 – disables playing the music
1 – lowest volume
10 – highest volume
Note: System reset is not required for flag changes to take
effect.
IVR_ROLL_CALL_USE_TON
ES_INSTEAD_OF_VOICE
This flag is applicable in versions prior to version 7.6.
In version 7.6 this flag is replaced by IVR Service - Roll Call/
Notifications options.
When set to YES, the system does not playback the Roll Call
names when participants enter or exit the conference. If the
voice messages are replaced with tones the system will play
these tones instead.
The use of tones requires the uploading of the appropriate
tone files in *wav format and replacing the Roll Call Joined
and Roll Call Left message files with the tone files in the
Conference IVR Service - Roll Call dialog box.
When the flag is set to NO, Roll Call names are announced
when participants enter or exit the conference.
Default: NO.
IVR_ROLL_CALL_VOLUME The volume of the Roll Call varies according to the value of
this flag.
Possible value range: 0-10 (Default: 6).
0 – disables playing the Roll Call
1 – lowest volume
10 – highest volume
Note:
• It is not recommended to disable the Roll Call by setting
the flag value to 0.
• System reset is not required for flag changes to take
effect.
Table 22-1 System Flags – MCMS_PARAMETERS (Continued)
Flag Description