Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
8-10 Polycom, Inc.
IP Address
(H.323 and SIP Only)
Enter the IP address of the participant’s endpoint.
For H.323 participant define either the endpoint IP address or
alias.
For SIP participant define either the endpoint IP address or the
SIP address.
For RMXs registered to a gatekeeper, the RMX can be configured to
dial and receive calls to and from H.323 endpoints using the IP
address in the event that the Gatekeeper is not functioning. For more
information, see "Gateway Calls” on page 19-1.
Note: This field is hidden when the ISDN/PSTN protocol is selected.
Phone Number
(ISDN/PSTN Only)
Enter the phone number of the ISDN/PSTN participant.
Note: This field is only displayed when the ISDN/PSTN protocol is
selected.
Alias Name/Type
(H.323 Only)
If you are using the endpoint’s alias and not the IP address, first
select the type of alias and then enter the endpoint’s alias:
H.323 ID (alphanumeric ID)
E.164 (digits 0-9, * and #)
Email ID (email address format,
e.g. abc@example.com)
Participant Number (digits 0-9, * and #)
Note:
Although all types are supported, the type of alias is dependent on
the gatekeeper’s capabilities. The most commonly supported alias
types are H.323 ID and E.164.
This field is used to enter the Entry Queue ID, target Conference
ID and Conference Password when defining a cascaded link.
This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
SIP Address/Type
(SIP Only)
Select the format in which the SIP address is written:
SIP URI - Uses the format of an E-mail address, typically
containing a user name and a host name: sip:[user]@[host]. For
example, sip:dan@polycom.com.
TEL URI - Used when the endpoint does not specify the domain
that should interpret a telephone number that has been input by
the user. Rather, each domain through which the request passes
would be given that opportunity.
For example, a user in an airport might log in and send requests
through an outbound proxy in the airport. If the users enters “411”
(this is the phone number for local directory assistance in the United
States), this number needs to be interpreted and processed by the
outbound proxy in the airport, and not by the user's home domain. In
this case, tel: 411 is the correct choice.
Note: This field is removed from the dialog box when the ISDN/PSTN
protocol is selected.
Table 8-3 New Participant – General Properties (Continued)
Field Description