Filter
Top Products
Chapter 22-System Configuration Flags
Polycom, Inc. 22-37
SIP_FREE_VIDEO_RESOU
RCES
For use in Avaya and Microsoft Environments.
When set to NO (required for Avaya and Microsoft
environments), video resources that were allocated to
participants remain allocated to the participants as long as
they are connected to the conference even if the call was
changed to audio only. The system allocates the resources
according to the participant’s endpoint capabilities, with a
minimum of 1 CIF video resource.
Enter YES to enable the system to free the video resources
for allocation to other conference participants. The call
becomes an audio only call and video resources are not
guaranteed to participants if they want to add video again.
Default value in Microsoft environment: NO.
SIP_TCP_PORT_ADDR_ST
RATEGY
Setting the flag to 1 prevents the use of two sockets for one
SIP call - one for inbound traffic, one for outbound traffic. This
is done by inserting port “5060/5061” into the Route[0] header.
Possible values:
• 0 - Inbound traffic on port 5060/5061 outbound traffic on
port 60000
• 1 - Both inbound and outbound traffic on port 5060/5061
Default: 1
SITE_NAME_TRANSPAREN
CY
(MPM+ Only)
In MPM+ Mode this flag is used to enable or disable
transparency (50%) of the Site Name in the video layout.
Set the value of this flag to NO to disable Site Name
Transparency.
Default: YES.
In MPMx Mode this function is controlled using the Profile -
Site Names dialog box.
SITE_NAMES_ALWAYS_ON
(MPM+ Only)
In MPM + Mode this flag is used to enable or disable the
permanent display of Site Name in the video layout.
Set the value of this flag to YES to enable the permanent
display of Site Names.
Default: NO.
In MPMx Mode this function is controlled using the Profile -
Site Names dialog box.
SOCKET_ACTIVITY_TIMEO
UT
For use in Microsoft environments.
When the MS_KEEP_ALIVE System Flag is set to YES, the
value of this flag is used as the MS Keep-Alive Timer value.
SUPPORT_HIGH _PROFILE Enables or disables the support of High Profile video protocol
in CP conferences. This flag is specific to CP conferences
and has no effect on VSW conferences.
Range: YES / NO
Default: YES
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description