Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
20-12 Polycom, Inc.
Adding MCUs to the MCUs List
The RMX Manager can connect to one or several RMXs simultaneously. If the site’s
configuration includes more than one MCU, or when a new MCU is added to your
configuration, and you want to monitor and control all MCUs from within the same
window, you must add the MCU to the MCUs list.
To add the MCU to the list of MCUs being managed, define the MCU’s connection
parameters.
To add a RMX unit:
1 On the MCUs toolbar, click the Add MCU button to add an MCU to the MCU list.
The Add MCU dialog box opens.
2 Define the following parameters:
The RMX must be installed and its IP addresses properly configured in the Management Network
Service before defining its connection parameters in the RMX Manager application.
Table 21 MCU Properties
Field Description
MCU Name Enter the name of the MCU on the network.
MCU IP Enter the IP address of the MCU’s Control Unit. The IP address must be
identical to the one configured in the MCU during first entry Configuration.
For more details, see the RealPresence Collaboration Server 1500/2000/
4000 Getting Started Guide, "Modifying the Factory Default Management
Network Settings on the USB Key” on page 2-6.
Port Enter the number of the port used for communication and data
transactions between the RMX unit and the RMX Manager.
For standard connection, enter 80.
For a Secured connection (using TLS or SSL), enter 443.
Username Enter the user name with which you will login to the MCU. A User with
this name must be defined in the RMX Users list. The system is shipped
with a default User whose name is POLYCOM.