Filter
Top Products
Chapter 16-Network Services
Polycom, Inc. 16-59
System Flags and License Settings
The MULTIPLE_SERVICES System Flag determines whether the Multiple Services option
will be activated once the appropriate license is installed. Possible Values: YES / NO
Default: NO
This flag must be manually added to the system configuration and set to YES to enable this
option. For more information see "Manually Adding and Deleting System Flags” on page 22-18.
IP Network Service Definition
Use this procedure to define Network Services in addition to the Network Service already
defined during first entry installation and configuration. Each of the defined Network
Service can be associated with one or more media cards installed in the system (depending
on the system type).
Once a media card is associated with a Network Service it cannot be associated with
another network service.
To add new/additional Network Services:
1 In the Device Management pane, click IP Network Services ().
2 In the Network Services list toolbar, click the Add Network Service button.
If the MULTIPLE_SERVICES System Flag is set to YES and no RTM ISDN or RTM LAN card is
installed in the RealPresence Collaboration Server (RMX) 2000, an Active Alarm is displayed.
If the values or either of the MULTIPLE_SERVICES or V35_ULTRA_SECURED_SUPPORT System
Flags are changed from YES to NO, the defined IP Network Services are not displayed in the IP
Network Services list pane: they are, however, saved in the system.
If either of the flag values are changed back to YES, the saved defined IP Network Services will be
displayed.