Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
19-18 Polycom, Inc.
Defining the Gateway Profile
A Gateway Profile is a conferencing entity, based on the Conference Profile assigned to it,
that enables endpoints to dial-in and initiate Gateway Sessions. The system is shipped with a
default Gateway Profile, named Default_GW_Session.
When an endpoint calls the Gateway Profile, a new Gateway Session is automatically created
based on the Profile parameters, and the endpoint joins the gateway call which can also be a
multipoint conference if more than two participants are connected to the conference.
The Gateway Profile defines the parameters of the gateway call that are taken from the
Conference Profile assigned to it, such as line rate, resolution, the IVR Service to be used and
the dial-in numbers.
To define a new Gateway Profile:
1 In the RMX Management - Rarely Used pane, click Gateway Profiles .
2 In the Gateway Profiles list pane, click the New Gateway Profile button.
The New Gateway Profile dialog box opens.
Up to 1000 Gateway Profiles, Entry Queues, IP Factories and Meeting Rooms can be defined in the
RMX (they are all part of one repository whose size is 1000 entries).
Do not enable PSTN/ISDN access without defining the dial-in numbers range and/or the use of “Dial-
In Numbers as Prefix Range”. If you enable the PSTN/ISDN access without the definition of the
dialing parameters, people can dial in to the gateway from outside the organization and then make
long distance calls at the 'host' expense.