Filter
Top Products
Chapter 23-RMX Hardware Monitoring
Polycom, Inc. 23-29
You can view Diagnostic Tests & Tests Monitoring by clicking the Advanced
Diagnostics Tab.
The Diagnostics Tests & Monitoring Tests panes are displayed on the right side of the
window pane.
Figure 23-3 RMX 2000/4000 Diagnostics Tests & Monitoring Tests
Advanced
Diagnostics
Tab
When you click the Advanced Mode the RMX enters a “Diagnostics Mode”.
The Advanced Mode can be exited by pressing the yellow System Reset icon. The RMX then
resets.
On MPM+/MPMx and all RTM IP card types, double click each card to view details of the Test
Selection pane as shown in step 5.
Run all Test
Selection
Diagnostics Test Monitoring