Filter
Top Products
Appendix H-Setting the MCU for Integration Into Microsoft Environment
Polycom, Inc. H-17
If you have not defined such a prefix in the IP Network Service in the MCU
configuration, you can add it later, using value entered here.
7 In the Gateways - Addresses box, click the Add button.
The Add Route Gateway dialog box opens.
8 Select the MCU gateway address that was set up in Configuring the MCU as a Routable
Gateway that appears in the drop down list of gateways.
9 Click OK to save the address and return to the Add Route dialog box.
10 In the Phone Usage box, click the Configure button.
The Configure Phone Usage Records dialog box opens.
11 In the Available box, click Default Usage and then click the > button.
The Default Usage option appears in the Configured box.
12 Click OK.
13 In the Add Route dialog box, click OK to save the new route.