Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-22 Polycom, Inc.
CPU_BONDING_MODE Sets the Bonding Mode of the Signalling and Management
network interface controllers.
Mode=6, balance-alb,
(Adaptive Load Balancing) includes balance-tlb, (Transmit
Load Balancing) and balance-rlb (Receive Load Balancing)
for IPV4 traffic. No special switch support is required.
Receive Load Balancing is achieved by ARP negotiation.
Outbound ARP Replies are intercepted and their source
hardware address is overwritten with the unique hardware
address of one of the slaves in the bond. In this way different
peers will use different hardware addresses for the server.
Note: balance-alb is the only supported value. All other
possible values are for troubleshooting purposes only.
Default: balance-alb
Possible values:
• balance-alb
• balance-rr
• active-backup
• balance-xor
• broadcast
• 802.3ad
• balance-tlb
DELAY_BETWEEN_H320_D
IAL_OUT_PARTY
(ISDN)
The delay in milliseconds that the MCU waits when
connecting dial out ISDN and PSTN participants.
Default: 1000
DISABLE_CELLS_NETWOR
K_IND
Disable the display of Network Quality Indicators displayed in
the cells of the conference Video Layout.
Default: YES
Range: YES / NO
DISABLE_DUMMY_REGIST
RATION
Enables or disables SIP dummy registration on the domain.
Possible Values:
NO (Default) - Disables SIP dummy registration.
YES - Enables SIP dummy registration.
Note: For homologation and certification testing, the flag must
be set to YES.
DISABLE_GW_OVERLAY_I
NDICATION
When set to NO (default), displays progress indication during
the connection phase of a gateway call.
Set the value to YES to hide the connection indications
displayed on the participant’s screen during the connection
phase of a gateway call.
DISABLE_SELF_NETWORK
_IND
Disable the display of the Network Quality Indicator of the
participant’s own endpoint.
Default: NO
Range: YES / NO
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description