Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-20 Polycom, Inc.
BONDING_DIALING_METH
OD
(ISDN)
When set to:
• SEQUENTIAL
The MCU initiates channel connections sequentially until it
reaches the number of channels defined by the
BONDING_NUM_CHANNELS_IN
_GROUP flag.
When a channel is connected, dialing begins for the next
channel in the group.
• BY_TIMERS
The MCU initiates channel connections sequentially using
the values of the BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
The first group of channels is dialed, using the
BONDING_CHANNEL_DELAY between dialing attempts
for each channel in the group.
The RMX then implements the
BONDING_GROUP_DELAY, before dialing the first
channel of the next group.
Default: SEQUENTIAL
BONDING_GROUP_DELAY
(ISDN)
When connecting several bonding groups, this is the delay
(number of 1/100 seconds) preceding the first dialing attempt
to connect the next bonding group.
Default: 500
BONDING_NUM_CHANNEL
S_IN_GROUP
(ISDN)
The number of channels in the bonding group to be
connected before dialing the next sequential channel.
Default: 50
BURN_BIOS Although not recommended
, setting this flag’s value to NO will
prevent BIOS upgrade.
Default: YES.
CAC_ENABLE When set to YES, enables the Call Admission Control
implementation in the RMX.
Default: NO (CAC is disabled)
CASCADE_LINK_PLAY_TO
NE_ON_CONNECTION
When set to YES, the RMX plays a tone when a cascading
link between conferences is established. The tone is played in
both conferences.
This tone is not played when the cascading link disconnects
from the conferences.
The tone used to notify that the cascading link connection has
been established cannot be customized.
Default value: NO.
The tone volume is controlled by the same flag as the IVR
messages and tones: IVR_MESSAGE_VOLUME.
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description