Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
17-30 Polycom, Inc.
6 To save this format, click the Save As button.
The Save As dialog box opens.
7 Select the location where the format will reside, enter a name and then click OK.
The system returns to the Sound Selection dialog box.
8 Click OK.
The system returns to the Properties for Sound dialog box.
9 Click OK.
The system returns to the Sound–Sound Recorder dialog box. You are now ready to
record your voice message.
To record a new audio message:
Make sure that a microphone or a sound input device is connected to
your PC.
1 On your PC, click Start > Programs > Accessories > Entertainment > Sound Recorder.
The Sound–Sound Recorder dialog box opens.
2 Click File > New.
3 Click the Record button.
The system starts recording.
4 Start narrating the desired message.
5 Click the Stop Recording button.
6 Save the recorded message as a wave file, click File > Save As.
Regardless of the recording utility you are using, verify that any new audio message recorded
adheres to the following format settings: 16.000kHz, 16Bit, Mono.
For all audio IVR messages, stop the recording anytime up to 3 minutes (which is the maximum
duration allowed for an IVR voice message). If the message exceeds 3 minutes it will be rejected by
the RMX unit.