Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-52 Polycom, Inc.
USER_LOCKOUT User Lockout can be enabled to lock a user out of the system after
three consecutive Login failures with same User Name. The user is
disabled and only the administrator can enable the user within the
system.
User Lockout is enabled when the flag is set to YES
USER_LOCKOUT_DUR
ATION_IN_MINUTES
The duration of the Lockout of the user is determined by the value of
this System Flag. A flag value of 0 means permanent User Lockout
until the administrator re-enables the user within the system.
USER_LOCKOUT_WIND
OW_IN_MINUTES
The time period during which the three consecutive Login failures
occur is determined by the value of this System Flag. A flag value of 0
means that three consecutive Login failures in any time period will
result in User Lockout.
User Management
DISABLE_INACTIVE_US
ER
The value of this System Flag determines the number of consecutive
days a user can be inactive before being disabled.
Strong Passwords
FORCE_STRONG_PAS
SWORD_POLICY
This System Flag, enables or disables all password related flags. It
cannot be set to NO when the RMX is in Ultra Secure Mode
HIDE_CONFERENCE_P
ASSWORD
Conference and Chairperson Passwords that are displayed in the RMX
Web Client or RMX Manager can be hidden when viewing the
properties of the conference. When the value of this System Flag is set
to YES, these passwords are replaced by asterisks in the RMX Web
Client, RMX Manager, Audit Event and Log files.
MAX_CONF_PASSWOR
D_REPEATED_CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters that are to be allowed in a
conference password.
Range: 1 - 4
Default: 2
MAX_NUMBER_OF_MA
NAGEMENT_SESSIONS
_PER _SYSTEM
Any attempt to exceed the maximum number of management sessions
per system as specified by the value of this System Flag is recorded as
an Audit Event.
MAX_NUMBER_OF_MA
NAGEMENT_SESSIONS
_PER _USER
Any attempt to exceed the maximum number of management session
per user as specified by the value of this System Flag is recorded as
an Audit Event.
MAX_PASSWORD_REP
EATED_CHAR
Allows the administrator to configure the maximum number of
consecutive repeating characters to be allowed in a password.
Range: 1 - 4
Default: 2
MIN_PASSWORD_LENG
TH
The length of passwords is determined by the value of this System
Flag. It cannot be set to NO when the RMX is in Ultra Secure Mode.
Table 22-9 ULTRA_SECURE_MODE System Flag Descriptions
Flag Description