Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
21-12 Polycom, Inc.
Flexible Resource Capacity
Flexible Resource Capacity is the default resource allocation mode in MPM+ and MPMx Mode
and is functionally identical to the MPM Flexible Resource Capacity described above.
To allocate Audio Only ports in MPM+ and MPMx mode:
1 Optional (otherwise skip to step 2): If the MCU is in Fixed Resource Capacity mode:
a In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, select Flexible Resource Capacity.
c Click OK.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
If switching from Fixed mode, all video resources are allocated as CIF video ports.
3 Continue with Step 2 of the MPM Mode Flexible Resource Capacity procedure described
above.
Fixed Resource Capacity (for AVC-based Conferencing)
To allocate resources in Fixed Resource Capacity mode:
1 Optional (otherwise skip to step 2): If the MCU is not in Fixed Capacity Mode.
a In the MCU menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
b In the Resource Capacity Mode box, click Fixed.
c Click OK.
2 In the RMX menu, click Setup > Video/Voice Port Configuration.
On the RMX1500 MPMx-Q assembly, the use of HD with Continuous Presence requires an
additional license. In the Resource Report and Resolution Configuration panes, HD settings are
displayed but are not enabled and if HD is selected the system will enable SD by default.
Resource re-configuration (if the system is already set to Fixed Resource Capacity mode) should
only be performed when no conferences are running on the MCU.
Capacity Mode Radio Buttons