Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000 Administrator’s Guide
G-4 Polycom, Inc.
Example: IP address – near 192.168.1.nn
The Subnet mask and Default gateway addresses should be the same as those for the
MCU’s Management Network.
The addresses needed for connection to either the MCU’s Default Management Network
or Alternate Management Network are listed in Table G-1.
For more information about connecting to the Alternate Management Network, see
"Connecting to the Alternate Management Network” on page G-6.
7 Click the OK button.
Connecting to the Management Network
To connect directly to the MCU:
1 Using a LAN cable, connect the workstation to the LAN 2 Port on the MCU’s back
panel.
2 Connect the power cable and power the MCU On.
3 Start the RealPresence Collaboration Server Web Client application on the workstation, by
entering the factory setting Management IP address in the browser’s address line and
pressing Enter.
4 In the RealPresence Collaboration Server Web Client Login screen, enter the default
Username (POLYCOM) and Password (POLYCOM) and click the Login button.
None of the reserved IP addresses listed in Table G-1 should be used for the IP Address.
Table G-1 Reserved IP Addresses
Network Entity
IP Address
Management
Network
(Factory Default)
Alternate Network
Control Unit IP Address 192.168.1.254 169.254.192.10
Control Unit Subnet Mask 255.255.255.0 255.255.240.0
Default Router IP Address 192.168.1.1 169.254.192.1
Shelf Management IP Address 192.168.1.252 169.254.192.16
Shelf Management Subnet Mask 255.255.255.0 255.255.240.0
Shelf Management Default Gateway 192.168.1.1 169.254.192.1
LAN 2 Port