Filter
Top Products
Chapter 19-Gateway Calls
Polycom, Inc. 19-17
Defining the Conference Profile for Gateway Calls
The Conference Profile that will be later assigned to the Gateway Profile determine the
parameters of the gateway call, such as the line rate and video resolution and if to
automatically terminate the gateway session when one participant or no participants are
connected to the Gateway Session.
To define a Conference Profile for Gateway Sessions:
1 In the RMX Management pane, click Conference Profiles.
2 In the Conference Profiles pane, click the New Profile button.
The New Profile – General dialog box opens.
3 Define the Profile name and select the line rate for the gateway session.
4 Click the Advanced tab.
The New Profile – Advanced dialog box opens.
5 Define the required settings for Encryption and LPR.
6 Set the Auto Terminate - At the End option to When Last Participant Remains ensuring
that the gateway call will end when only one participant is connected. For more details,
see Table 2-9, “New AVC Profile - Advanced Parameters,” on page 2-22.
7 Define the remaining Profile parameters as described in "Defining New Profiles” on
page 2-18.
From Version 7.2, Gathering phase is not supported in gateway calls, even if it is defined in the
Profile assigned to the Gateway Profile.