Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-34 Polycom, Inc.
SELF_IND_LOCATION Change the location of the display of the Network Quality
Indicator of the participant’s own endpoint.
Default: BOTTOM_RIGHT
Range:
• TOP_ LEFT
• TOP
• TOP_RIGHT
• BOTTOM_ LEFT
• BOTTOM
• BOTTOM_RIGHT
SEND_SIP_BUSY_UPON_R
ESOURCE_THRESHOLD
When set to YES, it enables the RMX to send a busy
notification to a SIP audio endpoint or a SIP device when
dialing in to the RMX whose audio resource usage exceeded
the Port Usage threshold.
When set to NO, the system does limit the SIP audio endpoint
connections to a certain capacity and will not send a busy
notification when the resource capacity threshold is
exceeded.
Default: NO
SEND_SRTP_MKI Enables or disables the inclusion of the MKI field in SRTP
packets sent by the RMX.
Set the value to NO to disable the inclusion of the MKI field in
SRTP packets sent by the RMX when using endpoints (eg.
CounterPath Bria 3.2 Softphone) that cannot decrypt SRTP-
based audio and video streams if the MKI (Master Key
Identifier) field is included in SRTP packets sent by the RMX.
Notes:
• This System Flag must be set to YES (default) when HDX
endpoints, Microsoft Office Communicator and Lync
Clients are used as they all support SRTP with MKI.
• The system flag must be added and set to NO when
Siemens phones (Openstage and ODC WE) are used in
the environment as they do not support SRTP with MKI.
Default: YES
SEND_WIDE_RES_TO_IP When set to YES (default), the RMX sends wide screen
resolution to IP endpoints. Endpoint types that do not support
wide screen resolutions are automatically identified by the
RMX according to their product type and version and will not
receive the wide resolution even when the flag is set to YES.
When manually added and set to NO, the RMX does not send
wide screen resolution to all IP endpoints.
Default: YES.
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description