Filter
Top Products
Chapter 10-Operator Assistance & Participant Move
Polycom, Inc. 10-9
6 Click the Video Quality tab.
Auto Terminate When selected (default), the conference automatically ends when the
termination conditions are met:
Before First Joins — No participant has connected to a conference
during the n minutes after it started. Default idle time is 10 minutes.
At the End - After Last Quits — All the participants have
disconnected from the conference and the conference is idle (empty)
for the predefined time period. Default idle time is 1 minute.
At the End - When Last Participant Remains — Only one
participant is still connected to the conference for the predefined time
period (excluding the recording link which is not considered a
participant when this option is selected). This option should be
selected when defining a Profile that will be used for Gateway Calls
and you want to ensure that the call is automatically terminated when
only one participant is connected. Default idle time is 1 minute.
Note: The selection of this option is automatically cleared and
disabled when the Operator Conference option is selected. The
Operator conference cannot automatically end unless it is terminated
by the RMX User.
Echo Suppression When enabled (default), an algorithm is used to search for and detect
echo outside the normal range of human speech (such as echo) and
automatically mute them when detected.
Clear this option to disable the Echo Suppression algorithm.
Note: This option is activated only in MPM+ and MPMx Card
Configuration Mode.
Keyboard Noise
Suppression
When enabled, an algorithm is used to search for and detect
keyboard noises and automatically mute them when detected.
Note: This option is activated only in MPM+ and MPMx Card
Configuration Mode.
Table 10-2 New Profile - Advanced Parameters (Continued)
Field/Option Description