Filter
Top Products
Polycom RealPresence Collaboration Server (RMX) 1500/2000/4000
22-32 Polycom, Inc.
PARTY_GATHERING_DURA
TION_SECONDS
The value of this System Flag sets the duration, in seconds, of
the display of the Gathering slide for participants that connect
to the conference after the conference start time.
Range: 0 - 3600
Default: 15
For more information see "Video Preview” on page 4-26.
PASSWORD_FAILURE_LIMI
T
The number of unsuccessful Logins permitted in Ultra Secure
Mode.
Default: 3
PCM_FECC Determines whether the DTMF Code, ##, the Far/Arrow Keys
(FECC) or both will activate the PCM interface. This flag can
be also be used in combination with DTMF code definitions to
disable PCM.
Possible Values: YES / NO
Default: YES.
PCM_LANGUAGE Determines the language of the PCM interface.
Possible Values are: ENGLISH, CHINESE_SIMPLIFIED,
CHINESE_TRADITIONAL, JAPANESE, GERMAN, FRENCH,
SPANISH, KOREAN, PORTUGUESE, ITALIAN, RUSSIAN,
NORWEGIAN
Default: Current RMX Web Client language.
PORT_GAUGE_ALARM When set to YES, if system resource usage reaches the High
Port Usage Threshold as defined for the Port Gauges, System
Alerts in the form of an Active Alarm and an SNMP trap are
generated.
PRESERVE_ICE_CHANNEL
_IN_CASE_OF_LOCAL_MO
DE
When set to NO (default), local the ICE channel is closed after
applying CAC bandwidth management when Call Admission
Control is enabled in the local network.
When set to YES, the ICE channel is preserved open
throughout the call.
Default: NO
PSTN_RINGING_DURATIO
N_SECONDS
If there is a slow response from the ISDN switch, the PSTN
dial-out ringing duration (in seconds) is used by the RMX to
disconnect the call.
Default: 45
QOS_IP_AUDIO Used to select the priority of audio packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
QOS_IP_VIDEO Used to select the priority of video packets when DiffServ is
the is the selected method for packet priority encoding.
Default: 0x88
REDIAL_INTERVAL_IN_SEC
ONDS
Enter the number of seconds that the RMX should wait before
successive re dialing attempts.
Range: 0-30 (Default: 10)
Table 22-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description