Polycom RMX 1500 Stereo Receiver User Manual


  Open as PDF
of 1010
 
Chapter 21-RealPresence Collaboration Server (RMX) Administration and Utilities
Polycom, Inc. 21-29
Unified MIB
The RMX uses the Polycom Unified MIB, in addition to the RMX specific MIB. The Polycom
Unified MIB is an MIB that is used by many Polycom products. The following table
describes the information provided by the RMX in the Unified MIB.
MIB-II/RFC1213-MIB
(RFC1213.MIB)
Holds basic network information and statistics about the following
protocols: TCP, UDP, IP, ICMP and SNMP. In addition, it holds a table of
interfaces that the Agent has. MIB-II also contains basic identification
information for the system, such as, Product Name, Description,
Location and Contact Person.
ENTITY-MIB
(ENTITY.MIB)
Describes the unit physically: Number of slots, type of board in each
slot, and number of ports in each slot.
Table 22 Unified MIB SNMP Fields
Name Type Description
Debug Boolean Indicates whether the unit is in a debugging state.
IncomingCallsReqrGK Boolean Indicates whether a gatekeeper is required to
receive incoming H.323 calls.
OutgoingCallsReqrGK Boolean Indicates whether a gatekeeper is required to make
outgoing H.323 calls.
HDBitrateThrshld Integer The minimum bit rate required by endpoints in order
to connect to an HD conference.
MaxCPRstln Integer Maximum resolution of a CP conference.
MaxCPRstlnCfg Integer Configured resolution for a CP conference.
EndpointDispayName String The name of the MCU that is displayed on the
screen of endpoints that are connecting to the
conference.
PALNTSC NTSC/PAL/
AUTO
The video encoding of the RMX.
SeparateMgmtNet Boolean Indicates whether management network separation
is enabled.
NumPorts Integer Total number of ports.
NumVideoPorts Integer Number of ports configured for video.
ServiceH323 Integer Indicates the status of H.323 capabilities:
1 - The service is enabled and operational.
2 - The service is enabled but is not operational.
3 - The service is disabled.
ServiceSIP Integer Indicates the status of SIP capabilities:
1 - The service is enabled and operational.
2 - The service is enabled but is not operational.
3 - The service is disabled.
MIB Name Description