Chapter 22-System Configuration Flags
Polycom, Inc. 22-45
CS_ENABLE_EPC Flag
Endpoints that support People+ may require a different signaling (for example, FX
endpoints). For these endpoints, manually add the flag CS_ENABLE_EPC with the value
YES (default value is NO) to the CS_MODULE_PARAMETERS tab.
Automatic Password Generation Flags
The RMX can be configured to automatically generate conference and chairperson
passwords when the Conference Password and Chairperson Password fields are left blank.
Guidelines
• If the flag HIDE_CONFERENCE_PASSWORD is set to YES, the automatic generation
of passwords (both conference and chairperson passwords) is disabled, regardless of
the settings of the flags NUMERIC_CONF_PASS_DEFAULT_LEN and
NUMERIC_CHAIR_PASS_ DEFAULT _LEN.
• The automatic generation of conference passwords is enabled/disabled by the flag
NUMERIC_CONF_PASS_DEFAULT_LEN.
• The automatic generation of chairperson passwords is enabled/disabled by the flag
NUMERIC_CHAIR_PASS_ DEFAULT _LEN.
• The automatically generated passwords will be numeric and random.
• The passwords are automatically assigned to ongoing conferences, Meeting Rooms and
Reservations at the end of the creation process (once they are added to the RMX).
• Automatically assigned passwords can be manually changed through the Conference/
Meeting Room/Reservation Properties dialog boxes.
• Deleting an automatically created password will not cause the system to generate a new
password and the new password must be added manually or the field can be left blank.
• If a password was assigned to the conference via Microsoft Outlook using the PCO add-
in, the system does not change these passwords and additional passwords will not be
generated (for example, if only the conference password was assigned a chairperson
password will not be assigned).
• If the flag values (i.e. the password lengths) are changed, passwords that were already
assigned to conferences, Meeting Rooms and Reservations will not change and they can
CP_LAYOUT_2P8
CP_LAYOUT_1P12
CP_LAYOUT_4X4
Table 22-6 LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values (Continued)
Layout Flag Value