865
display natpt all
Syntax display natpt all
View Any view
Parameter None
Description Use the
display natpt all command to display all NAT-PT configuration
information.
Example # Display all NAT-PT configuration information.
<Sysname> display natpt all
NATPT IPv4 Address Pool Information:
1: from 1.1.1.1 to 1.1.1.4
NATPT address mapping(v6bound view):
IPv4 Address IPv6 Address Type
1.1.1.1 3001::0001 SOURCE
2.2.2.2 3001::0002 DESTINATION
NATPT V6Server static mapping:
IPv4Address IPv6 Address Pro
1.1.1.1^ 6 3001::0003^ 1270 TCP
NATPT V4bound information:
No Dynamic V4 Address Records Present
NATPT V6bound information:
No Dynamic V6 Address Records Present
NATPT Prefix Info:
Prefix Interface NextHop
2001::
NATPT aging-time value information:
tcp -------aging-time value is 86400 (seconds)
udp -------aging-time value is 40 (seconds)
icmp -------aging-time value is 20 (seconds)
dns -------aging-time value is 10 (seconds)
syn -------aging-time value is 240 (seconds)
icmp -------aging-time value is 20 The timeout time for an ICMP packet is 20 seconds.
dns -------aging-time value is 10 The timeout time for a DNS packet is 10 seconds.
syn -------aging-time value is 240 The timeout time for a synchronization packet is 240
seconds.
finrst -------aging-time value is 5 The timeout time for a finrst packet is 5 seconds.
frag -------aging-time value is 5 The timeout time for a fragmented packet is 5
seconds.
Table 185 Description on fields of the display natpt aging-time command
Field Description
