1421
undo register-suppression-timeout
View Public instance PIM view, VPN instance PIM view
Parameter interval: Register suppression timeout in seconds, in the range of 1 to 3,600.
Description Use the
register-suppression-timeout command to configure the register
suppression timeout time.
Use the
undo register-suppression-timeout command to restore the default
setting.
By default, the register suppression timeout time is 60 seconds.
Related command: probe-interval (PIM view) and register-policy (PIM view).
Example # Set the register suppression timeout time to 70 seconds in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-suppression-timeout 70
register-whole-checksum (PIM view)
Syntax register-whole-checksum
undo register-whole-checksum
View Public instance PIM view, VPN instance PIM view
Parameter None
Description Use the
register-whole-checksum command to configure the router to
calculate the checksum based on the entire register message.
Use the
undo register-whole-checksum command to restore the default
configuration.
By default, the checksum is calculated based on the header in the register
message.
Related command: register-policy (PIM view) and register-suppression-timeout (PIM view).
Example # Configure the router to calculate the checksum based on the entire register
message in the public instance.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] register-whole-checksum
