66
NAT-PT CONFIGURATION COMMANDS
display natpt address-group
Syntax display natpt address-group
View Any view
Parameter None
Description Use the
display natpt address-group command to display the configuration
information of a NAT-PT address pool.
Example # Display the configuration information of a NAT-PT address pool.
<Sysname> display natpt address-group
NATPT IPv4 Address Pool Information:
1: from 1.1.1.1 to 1.1.1.4
display natpt address-mapping
Syntax display natpt address-mapping
View Any view
Parameter None
Description Use the
display natpt address-mapping command to display the static and
dynamic NAT-PT mappings.
The displayed information does not include the information about port translation
through the NAPT-PT mechanism.
Example # Display the static and dynamic NAT-PT mapping.
Table 183 Description on fields of the display natpt address-group command
Field Description
1: Address pool number
from 1.1.1.1 Start address in an address pool
to 1.1.1.4 End address in an address pool
