180
VOICE RADIUS CONFIGURATION
COMMANDS
aaa-client
Syntax aaa-client
View Voice view
Parameter None
Description Use the
aaa-client command to enter voice AAA client view.
Example # Enter voice AAA client view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] aaa-client
[Sysname-voice-aaa]
accounting
Syntax accounting
undo accounting
View Access number view
Parameter None
Description Use the
accounting command to enable the RADIUS accounting function for
users who dial some access number.
Use the
undo accounting command to disable the RADIUS accounting function.
By default, the RADIUS accounting function is disabled for users who dial access
numbers.
On one voice gateway, the RADIUS accounting function for one-stage dialing
users (who dial a called number to originate a call after picking up the phone)
differs from that for two-stage dialing users (who first dial an access number and
then a called number to originate a call after picking up the phone). This
command is only applicable to an access number, namely, two-stage dialing users.
