28
LINK AGGREGATION DEBUGGING
COMMANDS
debugging lacp packet
Syntax debugging lacp packet [ interface interface-type interface-number [ to interface-type
interface-number ] ]
undo debugging lacp packet [ interface interface-type interface-number [ to
interface-type interface-number ] ]
View User view
Default Level 1: Monitor level
Parameters interface-type interface-number: Port type and port number.
to: Specifies the ports with their port type and port number within the port range
enclosed by the two interface-type-interface-number argument pairs around this
keyword.
Description Use the
debugging lacp packet command to enable debugging for LACP
protocol packets on the specified port(s).
Use the
undo debugging lacp packet command to disable debugging for
LACP protocol packets on the specified port(s).
By default, debugging for LACP protocol packets is disabled on a port.
If no port is specified, the command applies to all the ports running LACP.
Table 76 Description on the fields of the debugging lacp packet command
Field Description
size Size of a protocol packet, which is 128 bytes.
subtype Sub type of a protocol packet, which is 1 for
LACP protocol packets.
version Protocol version, which is 1 for LACP.
