2194 CHAPTER 142: SSH2.0 CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
ssh server enable
Syntax ssh server enable
undo ssh server enable
View System view
Parameter None
Description Use the
ssh server enable command to enable SSH server.
Use the undo ssh server enable command to disable SSH server.
By default, SSH server is disabled.
Example # Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable
ssh server rekey-interval
Syntax ssh server rekey-interval hours
undo ssh server rekey-interval
View System view
Parameter hours: Server key pair update interval in hours, in the range 1 to 24.
Description Use the
ssh server rekey-interval command to set the interval for updating the
RSA server key.
Use the
undo ssh server rekey-interval command to remove the
configuration.
By default, the update interval of the RSA server key is 0, that is, the RSA server
key is not updated.
Related command: display ssh server.
c
CAUTION: This command is only available to SSH users using SSH1 client software.
Example # Set the RSA server key update interval to three hours.
