169
Parameter None
Description Use the
flow-control command to turn on flow control on an Ethernet interface.
Use the
undo flow-control command to turn off flow control on an Ethernet
interface.
By default, flow control on an Ethernet interface is turned off.
n
The flow control can be implemented on the local Ethernet interface only when
the flow control function is enabled on both the local and peer devices.
Example # Turn on flow control on interface Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] flow-control
interface
Syntax interface interface-type interface-number
View System view
Parameter interface-type interface-number: Interface type and interface number.
n
■ Interface is identified by slot number/interface number, for example, Ethernet
1/0 can be represented as 1/0.
■ For ease of user input, interface type can be abbreviated so long as it does not
cause any confusion, for example, interface Ethernet 1/0 can be abbreviated as
e1/0.
Description Use the
interface command to enter the related interface view.
Example # Enter interface view of the interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0]
loopback
Syntax loopback { external | internal }
undo loopback
View Ethernet interface view
