1222 CHAPTER 82: IPV6 BGP CONFIGURATION COMMANDS
Description Use the bestroute as-path-neglect command to configure the IPv6 BGP router
to not evaluate the AS_PATH during best route selection.
Use the
undo bestroute as-path-neglect command to configure the IPv6 BGP
router to use the AS_PATH during best route selection.
By default, the router takes AS_PATH as a factor when selecting the best route.
Examples # Ignore AS_PATH in route selection.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] bestroute as-path-neglect
bestroute compare-med (IPv6 address family view)
Syntax bestroute compare-med
undo bestroute compare-med
View IPv6 address family view
Parameters None
Description Use the
bestroute compare-med command to enable the comparison of the
MED for paths from each AS.
Use the
undo bestroute compare-med command to disable this comparison.
This comparison is not enabled by default.
Examples # Compare the MED for paths from an AS for selecting the best route.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] bestroute compare-med
bestroute med-confederation (IPv6 address family view)
Syntax bestroute med-confederation
undo bestroute med-confederation
View IPv6 address family view
Parameters None
