1286 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS
display ospfv3 lsdb statistic
Syntax display ospfv3 lsdb statistic
View Any view
Parameters None
Description Use the
display ospfv3 lsdb statistic command to display LSA statistics in the
OSPFv3 LSDB.
Examples # Display OSPFv3 LSDB statistics.
<System> display ospfv3 lsdb statistic
OSPFv3 Router with ID (1.1.1.1) (Process 1)
LSA Statistics
----------------------------------------------------------------------
Area ID Router Network InterPre InterRou IntraPre Link ASE
0.0.0.0 2 1 1 0 1
0.0.0.1 1 0 1 0 1
Total 3120230
Originating Router Originating Router
LS Seq Number LSA Sequence Number
Checksum LSA Checksum
Length LSA Length
Priority Router Priority
Options Options
Link-Local Address Link-Local Address
Number of Prefixes Number of Prefixes
Prefix Address prefix
Prefix Options Prefix options
Table 301 Description on the fields of the display ospfv3 lsdb command
Field Description
Table 302 Descriptions on the fields of the display ospfv3 lsdb statistic command
Field Description
Area ID Area ID
Router Router-LSA number
Network Network-LSA number
InterPre Inter-Area-Prefix-LSA number
InterRou Inter-Area-Router-LSA number
IntraPre Intra-Area-Prefix-LSA number
Link Link-LSA number
ASE AS-external-LSA number
Total Total LSA number
