Filter
Top Products
92
Editing a song
Restricting the type of events that will be edited (View
Filter)
If there is a large amount of sequence data, numerous events will be displayed,
possibly making it difficult to edit. In such cases, you can use the View Filter to
restrict the types of events that will be displayed, letting you edit only the events
that are displayed.
1.
In either the SEQUENCE screen, SEQUENCE EDIT screen, or
EVENT LIST screen, Press .
The MENU will appear.
2. Selects View Filter and then press .
The VIEW FILTER popup (p. 245) will
appear.
3. Either turn the VALUE dial or
press (On/Off) to add a
check mark ✔ to the events
you want to view (and edit).
Events with a check mark (✔) will be
displayed; events without a check
mark will not be displayed.
Pressing [F1 (All On)] will add a check mark to all events, and pressing [F1 (All
Off)] will remove the check mark from all events.
4. Press (Close).
The VIEW FILTER popup will close. The icon shown in the lower right of the
SEQUENCE screen indicates the View Filter status you specified.
Message and icon Explanation
Note
Note messages; MIDI messages that indicate a note.
Poly Aftertouch
Polyphonic Aftertouch messages; MIDI messages that
apply aftertouch to individual keys.
Control Change
Control Change messages; MIDI messages that apply
various effects such as modulation or expression.
Program Change
Program Change messages; MIDI messages that select
sounds.
Channel Aftertouch
Channel Aftertouch messages; MIDI messages that ap-
ply aftertouch to an entire MIDI channel.
Pitch Bend
Pitch Bend messages; MIDI messages that change the
pitch.
Tune Request
This MIDI message causes an analog synthesizer to
tune itself.
Mode Message
MIDI Mode Message that changes the mode
System Exclusive
System Exclusive messages; MIDI messages that con-
tain settings specific to the MV-8000 itself, such as
sound settings.
Icon Explanation
View Filter is off (events displayed)
View Filter is on (events not displayed)
ECS05_manual_e.book 92 ページ ２００５年１１月３０日 水曜日 午前１１時１４分