Filter
Top Products
335
DISK/USB
PROJECT SYSTEM DISK/USB MASTERING SAMPLING
FORMAT popup
Here you can format (initialize) a disk. This will erase
all data from the specified drive.
To access this screen
•
➜➜
F-buttons
No
Cancels the operation and closes the FORMAT
popup.
Yes
Starts the Format operation. Formatting will require a
certain amount of time. When formatting is
completed, a Completed popup will appear.
In the Completed popup, pressing [F5 (Close)] will
perform the following operations.
There is no way for you to recover the deleted data
(unless you have previously made a backup of it).
Roland accepts no responsibility for the recovery of
lost data, nor for any damages that may result from
such loss.
The project created after formatting will be named
Newproj_***, and the song will be named
NewSong_**** (**** is a number). To edit these
names, use the appropriate name edit screen.
Formatted media
Pressing [F5 (Close)] will...
Floppy disk /
CD-RW disc
Close the Completed popup.
Hard disk
Close the Completed popup;
then automatically create a
project and song, and display
the
SEQUENCE screen
(p.
205).
ECS05_manual_e.book 335 ページ ２００５年１１月３０日 水曜日 午前１１時１４分