Filter
Top Products
134
Creating an audio CD
This will move the position of the file at which the
cursor is located.
If you want to insert silence between songs, press
[MENU], select “Gap Time,” and press [ENTER]. The
GAP TIME popup
(p. 352) will appear. Set the GAP TIME
parameter to the length of the silence you want to insert.
(The default value is 2.00 seconds.) The specified amount
of silence will be inserted in front of the track.
If you're making a CD of a live performance or similar source, you can set the Gap parameter of
each track to 0 so that the tracks will be connected.
7.
When you're finished making settings in the cue list, press (Write CD).
The WRITE CD popup will appear, and writing will begin. When writing is completed,
the CD-R/RW drive tray will open. Remove the disc. Your original audio CD is
finished!
The MV-8000's CD writing method is fixed at “Disc At Once,” meaning that you will be able to
use this disc as a pressing master for commercial mass production. When the Disc At Once
method is used, no further data can be written to the disc afterward, even if there is space
(recording time) remaining on the disc.
If you change your mind and
decide to remove a song from
the cue list, move the cursor in
step 4 to the song you want to
remove, and press [F2
(Delete)].
The Gap parameter you
specify here is also called the
“pre gap”
The speed at which the data is
written to the CD will be
selected automatically,
according to the optimal speed
supported by the media you're
using.
ECS05_manual_e.book 134 ページ ２００５年１１月３０日 水曜日 午前１１時１４分