Filter
Top Products
169
Using the MV-8000 with MIDI or V-LINK devices
Using the MV-8000 with MIDI or V-LINK
devices
Creating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Project and disk management Using data of other formats
Using V-LINK devices
What is V-LINK?
V-LINK ( ) is a function that lets you create performances that link music
and video. By using a V-LINK compatible video device with the MV-8000, you can
easily produce a variety of video effects that are linked to your performance.
For example...
If you use the MV-8000 with an Edirol DV-7PR, you can
• Use the MV-8000 to remotely make performance settings on the Edirol
DV-7PR.
• Use the MV-8000's sequencer to create synchronized music and video
performances.
• Use the MV-8000's pads to switch images (clips/palettes) on the Edirol
DV-7PR.
• Use the MV-8000's sliders to control the brightness or color of the images.
Example connections
Connect the MV-8000's MIDI OUT connector via an Edirol UM-1 etc. to the Edirol
DV-7PR's REMOTE connector.
Switching V-LINK on/off
1.
Press .
[V-LINK] will light blue, and the V-LINK function will be turned On (i.e., V-LINK will
be available). You can operate the MV-8000's pads to control the images in
synchronization with your performance on the MV-8000.
2.
Press once again.
[V-LINK] will go dark, and the V-LINK function will be turned Off (normal operating
mode).
In order to use the MV-8000
with the Edirol DV-7PR via
V-LINK, you will need an
Edirol UM-1/-1S/-1SX (sold
separately) for connections.
Before you make connections,
you must turn down the
volume of all devices and turn
off the power to avoid
malfunctions or speaker
damage.
Edirol DV-7PR
Display
Edirol UM-1
Projector
MIDI OUTA/B
REMOTE
MV-8000